Specifications

Model S0340-FPB_ _ is a pedestal mounted eye/face wash, with a stainless steel bowl, ABS plastic eye/face wash spray heads and a frost proof bury valve with a push handle. Valve and supply are buried below the frost line to protect the unit from freezing. The assembly is designed to drain completely, thus leaving no residual water in the unit and preventing it from freezing. Standard bury
lengths are 24", 36" and 48". Specify the bury depth of the valve with the last two (2) digits of the model number (i.e. S0340-FPB24 for 24" bury).

Standard Equipment

Spray Head Assembly: ABS yellow plastic eye/face wash heads with integral flip dust covers, internal flow controls and filters to remove debris from the water.

Valve: 3/4" NPT freeze-resistant valve and push handle. The valve and supply are buried below the frost line to protect the unit from freezing. The valve has a bleed outlet to prevent the accumulation of water within the unit, thus permitting it to drain after each use.

Water Supply: 3/4" NPT male inlet.

Waste: 1-1/4" NPT female outlet.

Bowl: Stainless steel, 11-3/4" diameterbowl.

Piping & Mounting: Schedule 40 galvanized steel piping and a 9-1/8" diameter cast iron floor flange with a yellow powder coated finish.

Universal Sign: ANSI compliant, vertical identification sign.

Weekly Test Tag: A water proof test card to record the date and inspector's name for weekly functional testing of the unit.