Standard Equipment

Showerhead:  Yellow, ABS plastic 7-3/8" diameter showerhead with a 20 gpm flow regulator.
Shower Valve:  1" IPS rough chrome plated brass stay-open ball valve.  Unit is provided with a stainless steel actuator arm and a 29" stainless steel pull rod.
Spray Head Assembly:  ABS yellow plastic eye/face wash heads with integral flip dust covers, internal flow controls and filters to remove debris from the water.
Eye/Face Wash Valve:  1/2" IPS chrome plated brass, stay-open ball valve with a stainless steel stem and push handle.  An integrated weep hole drains residual water from the eye/face wash heads after each use.
Protection Valve:  freeze protection valve that opens automatically in the event electrical failure causes internal water temperatures to drop below 35ºF.
Water Supply:  1-1/4" NPT female threaded top or bottom inlet.
Jacket/Insulation:  1" thick removable foam insulation covered by a UV protected ABS plastic jacket.  All joints and openings are factory sealed.
Piping & Mounting:  Schedule 40 internal galvanized steel piping and a 9-1/8" diameter cast iron floor flange.
Electrical System/Heat Cable:  120 VAC, 60 HZ single phase.  Systems junction box and components are rated for Class 1, Division 2, Groups B, C and D.  Self regulating heat tracing cable is controlled by a thermostat that shuts off the heat when the ambient temperature reaches 55°F.  Cable is both FM and CSA approved.  
Universal Sign:  ANSI compliant, vertical identification sign.
Weekly Test Tag:  A water proof test card to record the date and inspector's name for weekly functional testing of the unit.